people and products you can trust
Concrete Go is a specially formulated, highly effective, combination of wetting agents and inhibited hydrochloric acid.
Concrete Go is used to clean and protect metal from damaging atmospheric corrosion and removes rust, scale, and
cement deposits from steel forms, tools, pipes, fittings, and painted metal surfaces. Concrete Go is non-staining and
can be used in immersion, circulation, or manual processes. 
Strong acid - avoid contact with eyes and skin. Do not breathe Concrete Go?s vapors and keep container tightly closed. Store upright at temperatures above freezing and do not mix with Bleach or any other cleaners. Do not use on soft metals such as Aluminum.
Immersion Process: Immerse item to be cleaned in a plastic container of Concrete Go for 10 to 60 minutes, depending on the deposit. Remove item and rinse with large quantities of water. Repeat immersion if required. Circulation Process: To clean pipes and tanks, circulate with a solution of 1 part Concrete Go with 3 parts water (1:3) for 1 to 4 hours. Inspect results and repeat circulation if required. Flush with plenty of water and/or a dilute alkaline solution to neutralize. Cleaning Cement Trucks and Large Surfaces: Apply a solution of 40 oz Concrete Go to 1 gallon water (335 ml/litre) (1:3) to surface with an acid-proof sprayer, brush, or mop. Agitate with a brush if possible and rinse with large quantities of water. Repeat process or increase concentration if required. Rinse with any dilute alkaline solution such as Clean Spray to neutralize any residual acid. For further information, please review the Safety Data Sheet (SDS) and Product Label.
Appearance: Milky liquid
Color: Whitish pink
Odor: Cherry
Foam: Moderate
pH: 0.5 - 1.5
Product Information Sheet:
Safety Data Sheet:
Concrete Go Product Info pdf